#ad
#ad
Parker Legris #ad - They are made of brass, stainless steel, PBT polybutylene terephthalate, and other materials that resist corrosion and wear. This legris 3008 series branch tee is a nylon and nickel-plated brass push-to-connect fitting. Nylon body and nickel-plated brass sub-base. The branch tee fitting is t-shaped and has push-to connect tube connections on both ends of the main run and a female threaded connection on the branch at a 90-degree angle from the middle of the tee.

Tube fittings have various types of connections, barbed, welded, including threaded, and push-to-connect also called one-touch. The npt threads create a tighter seal than straight threads. Dimensions for tees are represented as A x B x C. Branch tee for connecting two tubes to a male thread at a 90-degree angle.

Legris 3008 56 11 Nylon & Nickel-Plated Brass Push-to-Connect Fitting, Branch Tee, 1/4" Tube OD x 1/8" NPT Female #ad - Female npt threaded connection on the branch and push-to-connect connections on the main run. It has female national pipe taper npt threads on the branch for connecting male threaded pipes and it has push-to-connect tube connections on both ends of the main run. This fitting is made of nylon and nickel-plated brass — nylon for strength and flexibility, abrasion resistance, strength at high temperatures, light weight, and resistance to crushing and cracking, and nickel plating on its brass sub-base for ferromagnetic and corrosion resistance, and toughness and ductility at low temperatures.

Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg. A" and "b" indicate the main run on the fitting, and "C" indicates the branch.

More information about Parker Legris #ad

Legris 3008 56 14 Nylon & Nickel-Plated Brass Push-to-Connect Fitting, Branch Tee, 1/4" Tube OD x 1/4" NPT Female

#ad
#ad
Parker Legris #ad - Nylon body and nickel-plated brass sub-base. This legris 3008 series branch tee is a nylon and nickel-plated brass push-to-connect fitting. A" and "b" indicate the main run on the fitting, and "C" indicates the branch. Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg.

. This fitting is made of nylon and nickel-plated brass — nylon for strength and flexibility, strength at high temperatures, and resistance to crushing and cracking, abrasion resistance, light weight, and nickel plating on its brass sub-base for ferromagnetic and corrosion resistance, and toughness and ductility at low temperatures.

Legris 3008 56 14 Nylon & Nickel-Plated Brass Push-to-Connect Fitting, Branch Tee, 1/4" Tube OD x 1/4" NPT Female #ad - This branch tee is suitable for use in air, oil, water, chemical, and food applications. Tube fittings are components used for connecting, terminating, branching, and changing the direction of tubing in pneumatic and hydraulic systems. Tube fittings are used in various applications, including machine tools, airplane and truck controls, and automated production lines, among others.

Parker hannifin manufactures electromechanical, climate control, process control, sealing and shielding, and pneumatic motion technologies and systems for fluid handling, filtration, hydraulic, and aerospace applications. It has female national pipe taper npt threads on the branch for connecting male threaded pipes and it has push-to-connect tube connections on both ends of the main run.

Female npt threaded connection on the branch and push-to-connect connections on the main run. The npt threads create a tighter seal than straight threads.

More information about Parker Legris #ad


Similar products



Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump With 1/4

#ad
#ad
Malida #ad - Using a pressure gauge with your reverse osmosis system can be a great addition to your system as most problems that occur with reverse osmosis systems can relate to your water pressure. Pressure gauge pack includes: 1 x pressure gauge with ¼" male connection 1 x ¼" female to ¼" push fit 1 x ¼" Stem to ¼" push fit to ¼" push fit T Branch tee for connecting two tubes to a male thread at a 90-degree angle.

Stainless pressure Gauge 220 PSI with fitting. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg.

Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump With 1/4 #ad - Female npt threaded connection on the branch and push-to-connect connections on the main run. Nylon body and nickel-plated brass sub-base. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other.

Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe.

More information about Malida #ad


Similar products



Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee

#ad
#ad
Utah Pneumatic #ad - The tube fitting is prohibited where spark and fire might be occurred 3. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. The tube fitting is prohibited if water temperature is above 60'C 4. Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg.

Never apply tube joint with additional external loadbending, twist or pulling, otherwise damage or leakage will be occurred. Caution check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch. Please refer to following instruction in connection of tubing.

Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee #ad - When you insert the air tubing into the joint, you will have two-step feeling. Section one is locking claw and section two is sealing ring. Must insert tube into section two. Sleeve is used in tubing connection and disconnection. The sleeve is designed as an oval shape, which is covienient in assembly and disassembly.

However, round sleeve is available to met any special demand the product has limited space for oval sleeve. After connection of tube joint and tubing, always try to pull tubing and ensure its firm connection.

More information about Utah Pneumatic #ad


Similar products



Brennan PCNY2502-04-02 PBT Push-to-Connect Tube Fitting, 90 Degree Elbow, 1/4" Tube OD x 1/8" NPT Female

#ad
#ad
Brennan Industries, Inc. #ad - Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. Push-to-connect compression fittings do not require tools or sealants, such as a soldering torch, and are useful in installations where a heat source, is prohibited. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29.

5 in Hg. Branch tee for connecting two tubes to a male thread at a 90-degree angle. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems.

The company, oh, founded in 1953 and headquartered in solon, meets International Organization for Standardization ISO 9001:2008 standards and its fittings meet Society of Automotive Engineers SAE specifications. Fittings are available threaded or unthreaded, styles, sizes, in many shapes, and schedules pipe wall thickness.

Brennan PCNY2502-04-02 PBT Push-to-Connect Tube Fitting, 90 Degree Elbow, 1/4" Tube OD x 1/8" NPT Female #ad - Brennan Industries manufactures critical flow components. The brennan pcny2502 series 90-degree elbow fitting is made of polybutylene terephthalate PBT and has tube and NPT female connectors. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Female npt threaded connection on the branch and push-to-connect connections on the main run.

Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other.

More information about Brennan Industries, Inc. #ad


Similar products



1/4" Tube OD x 1/8" NPT Thread Pack of 10 - PneumaticPlus PC-1/4-N1 Push to Connect Tube Fitting, Male Straight

#ad
#ad
PneumaticPlus #ad - Nylon body and nickel-plated brass sub-base. Applicable Tube: Polyurethane and Nylon. Branch tee for connecting two tubes to a male thread at a 90-degree angle. Body style: Male Straight. Female npt threaded connection on the branch and push-to-connect connections on the main run. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other.

The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. 90-degree elbow for connecting two pipes or fittings at an angle. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems.

1/4" Tube OD x 1/8" NPT Thread Pack of 10 - PneumaticPlus PC-1/4-N1 Push to Connect Tube Fitting, Male Straight #ad - Operating temperature ranges from -4 to 175 degrees F. Fluid type: Air Only. Stainless pressure Gauge 220 PSI with fitting. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg.

Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing.

More information about PneumaticPlus #ad


Similar products



Control Devices ST Series Brass ASME Safety Valve, 150 psi Set Pressure, 1/4" Male NPT

#ad
#ad
Control Devices ST25-1A150 #ad - 90-degree elbow for connecting two pipes or fittings at an angle. Female npt threaded connection on the branch and push-to-connect connections on the main run. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit.

Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. This control devices st25-1a150 asme safety valve has a brass body, a 1/4" male NPT threaded inlet connection, a 150 psi relief pressure, and a stainless steel pull ring for manual pressure relief. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2.

Control Devices ST Series Brass ASME Safety Valve, 150 psi Set Pressure, 1/4" Male NPT #ad - 7 ounces/size:1/4 inch od. Branch tee for connecting two tubes to a male thread at a 90-degree angle. It also displays the nb mark for certification in accordance with NB-501, National Board Certification of Pressure Relief Devices. Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg.

1/4" tube od x 1/8" nPT Thread. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. The preset relief pressure is accurate to within +/- 3 percent and a silicon O-ring provides a leak-proof seal to within +/- 10 percent of the relief pressure.

More information about Control Devices ST25-1A150 #ad


Similar products



1/4" OD x 50' SAE J844 Nylon Air Brake Tubing Suspenion Horn Train Lowrider

#ad
#ad
Power Products C604 #ad - Body style: Male Straight. Stainless pressure Gauge 220 PSI with fitting. Nylon body and nickel-plated brass sub-base. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Push-to-connect fitting connects to pipes or tubing on one end and has an NPT female connector on the other.

. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. 250 degrees f maximum temperature for use in high temperature applications. Fluid type: Air Only. 1/4" male npT threaded inlet connection. Applicable Tube: Polyurethane and Nylon. 1/4" od x 50' sae j844 nylon air brake tubing branch tee for connecting two tubes to a male thread at a 90-degree angle.

1/4" OD x 50' SAE J844 Nylon Air Brake Tubing Suspenion Horn Train Lowrider #ad - 90-degree elbow for connecting two pipes or fittings at an angle. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Operating temperature ranges from -4 to 175 degrees F. Relief pressure preset to 150 psi with flow rate of 136 cfm.

More information about Power Products C604 #ad


Similar products



Vixen Horns 1/4" OD Nylon Plastic Hose Up to 225PSI 20 Feet for Train/Air Horn Systems and Other Suspension Applications VXA7142

#ad
#ad
Vixen Horns #ad - Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Made of polybutylene terephthalate PBT for resistance to solvents, heat, shrinkage, and impact. Working pressure of up to 290 psi. Length: 20 Feet. Outer diameter OD: ¼ inch. 90-degree elbow for connecting two pipes or fittings at an angle.

Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Relief pressure preset to 150 psi with flow rate of 136 cfm.

Vixen Horns 1/4" OD Nylon Plastic Hose Up to 225PSI 20 Feet for Train/Air Horn Systems and Other Suspension Applications VXA7142 #ad - The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. 1/4" male npT threaded inlet connection. This ¼" od black nylon hose has a length of 20 feet, an inner diameter of 1/8" and a wall thickness of 1/16". Nylon body and nickel-plated brass sub-base. Working pressure: 225PSI. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems.

1/4" tube od x 1/8" nPT Thread.

More information about Vixen Horns #ad


Similar products



DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed

#ad
#ad
DIGITEN #ad - Inner diameter ID: 1/8 inch. Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg. 1/4" male npT threaded inlet connection. If you want it works long hours, you should find a N/O normally open solenoid valve. We continually tests and tracks the product's working status, the highest working temperature of this product reaches 60℃, and the plastic part withstand extremely high temperatures to 150℃.

Wall thickness: 1/16 inch. Operating temperature ranges from -4 to 175 degrees F. 90-degree elbow for connecting two pipes or fittings at an angle. Asme safety rated with UV and NB marks. Length: 20 Feet. The highest working temperature of this product reaches 60℃. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4.

DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed #ad - Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Nylon body and nickel-plated brass sub-base. Stainless pressure Gauge 220 PSI with fitting.

More information about DIGITEN #ad


Similar products



HOSL DC 12V 1/4 Inch Electric Solenoid Valve for Air Water/Replacement Brass Valve for Use with Pipelines in Water, Air and Diesel Applications

#ad
#ad
HOSL INC #ad - Outer diameter OD: ¼ inch. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Medium: Air, water, diesel. Body style: Male Straight. Brass construction and stainless steel spring for corrosion resistance.

Stainless pressure Gauge 220 PSI with fitting. Applicable Tube: Polyurethane and Nylon. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Nylon body and nickel-plated brass sub-base. Wall thickness: 1/16 inch. Valve Body: Brass. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems.

HOSL DC 12V 1/4 Inch Electric Solenoid Valve for Air Water/Replacement Brass Valve for Use with Pipelines in Water, Air and Diesel Applications #ad - Push-to-connect fitting connects to pipes or tubing on one end and has an NPT female connector on the other. Relief pressure preset to 150 psi with flow rate of 136 cfm. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Acting Motion: Direct action.

Female npt threaded connection on the branch and push-to-connect connections on the main run.

More information about HOSL INC #ad


Similar products