#ad
#ad
Gowoops #ad - More information about Gowoops #ad

YARONGTECH-13.56MHZ ISO 14443A Blank White Printable MIFARE Classic 1K chip Plastic NFC Card,ic Card,RFID Card Pack of 10

#ad
#ad
YARONG #ad - 6. Iso14443a 7. Can work with rc522 and PN532 8. Uid can't change, because it's Standard MIFARE Classic chip. 9. We don't print the id number on the cards, because it has many different kind of Reader in the market, so we don't print the id number on the cards, output format is different, so buyer need to use the reader to read the card number.

We also sell the reader on our store. Mifare and mifare classic are trademarks of NXP B. V. 1. Mifare classic 1K Chip 2. Credit card size. 4. Blank white card. 5. 13. 56mhz. Mifare classic 1K card. 3. Pvc material.

More information about YARONG #ad


Similar products



Haitronic 120pcs 20cm Length Jumper Wire/Dupont Cable Multicolored10 Color 40pin M to F, 40pin M to M, 40pin F to F for Prototype Breadboard/Arduino/DIY/Raspberry Pi/Orange pi Robot Ribbon Cables

#ad
#ad
Haitronic HR0291 #ad - Just peel off. Factory directly, 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection. 0127mm, 36 awg/ single root, 20cm7. 87inch/axis; Standard 2. 54mm headers and sockets. Can be detached into120 single axis: 40 male-male, 40 male-female, 40 female-female.

Computers and smart phone maintainance, various prototyping, If the terminals does not damaged it can be reused, such as Arduino/Maker/3D printer control board, diy experiment needs frequently, if damaged can also be used for soldering. Features: Ø color: 10 options as shown in the pictures. We haitronic are original Factory with traditonal wholesale distributors on various jumper wires, arduino wire connectors.

Haitronic 120pcs 20cm Length Jumper Wire/Dupont Cable Multicolored10 Color 40pin M to F, 40pin M to M, 40pin F to F for Prototype Breadboard/Arduino/DIY/Raspberry Pi/Orange pi Robot Ribbon Cables #ad - What’s in package: * 1 x 20cm 40-pin male to female prototyping jumper wires ribbon cable* 1 x 20cm 40-pin male to male prototyping jumper wires ribbon Cable * 1 x20cm 40-pin Female to Female prototype Jumper Wires Ribbon Cable ØYour REVIEW is ULTRA PRECIOUS! we sincerely invite you share your review for this Multicolored BB Jumper Wires, MANY THANKS! Mifare classic 1K card.

The male ends meant for insertion into standard 01 quot;2. 54mm female sockets and the female ends are meant for insertion into standard 01 quot;2. 54mm male headers.

More information about Haitronic HR0291 #ad


Similar products



YARONGTECH-50pcs MIFARE Classic 1K Dia 25mm adhesive RFID Sticker NFC tag

#ad
#ad
YARONG #ad - Just peel off. Factory directly, 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection. 0127mm, 36 awg/ single root, 20cm7. 87inch/axis; Standard 2. 54mm headers and sockets. Can be detached into120 single axis: 40 male-male, 40 male-female, 40 female-female.

Computers and smart phone maintainance, such as arduino/Maker/3D printer control board, If the terminals does not damaged it can be reused, Various prototyping, diy experiment needs frequently, if damaged can also be used for soldering. Mifare classic 1k tag. Mifare classic sticker. 6. Can work with rc522 and pn532 please note: this nfc tag can't work with all phone or tablet, below phone can't work with this tag: Samsung Galaxy S7; Nexus 4; Nexus 10 Tablet; Nokia Lumia 610; RIM General; BlackBerry General MIFARE and MIFARE Classic are trademarks of NXP B.

YARONGTECH-50pcs MIFARE Classic 1K Dia 25mm adhesive RFID Sticker NFC tag #ad - V. 5. Blank paper finished. Mifare classic 1k sticker. Mifare classic 1k label. 1.

More information about YARONG #ad


Similar products



SunFounder Mifare RC522 Card Read Antenna RF Module RFID Reader IC Card Proximity Module for Arduino

#ad
#ad
SunFounder #ad - It utilizes a voltage of 3. 3v, through the SPI interface with simply a few wires. For more information, refer to https://www. Sunfounder. Com/wiki/index. Php?title=mifare_rc522_module_rfid_reader Specifications Operating current: 13-26mA/DC 3. 3v idle current: 10-13mA/ DC 3. 3v sleep current:. Introduction rfid module the original philips mfrc522 chip design circuit card reader is easy to use and low cost, and applies to the user equipment development, the reader and the development of advanced applications, and the need for the user RF card terminal design/production.

Directly connected with a CPU motherboard, the module can work in a stable and reliable manner as a distance card reader. This module can be directly loaded into various reader modules.

More information about SunFounder #ad


Similar products



Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi - HiLetgo RFID Kit

#ad
#ad
HiLetgo® NA #ad - The digital part handles ISO14443A framing and error detection. Mfrc522 support mifare series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. 4. As a highly integrated 13. 56mhz card reader new family of chips, there are many similarities between MF RC522, MF RC500 and MF RC530, but also have many differences.

In addition, support fast CRYPTO1 encryption algorithms, terminology validation MIFARE products. Support 14443A compatible transponder signals. Mfrc522 is a highly integrated read and write chip which is applicable to 13. 56mhz contactless communications. Rc522 chip 1. 5. It is a non-contact read and writer card chip, low voltage, low cost and small size, is a better choice for smart meters and portable handheld devices development.

Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for Arduino Raspberry Pi - HiLetgo RFID Kit #ad - Electrical parameters: Operating current :13-26mA/DC 3. 3v idle current :10-13mA/DC 3. 3v sleep current:. 2. 3. Mf rc522 completely integrated in all types of 13.

More information about HiLetgo® NA #ad


Similar products



ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable

#ad
#ad
ELEGOO EL-CB-005 #ad - It's got a pin layout that works well with the Mini or the Basic Stamp TX, GND on one top, ATN, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. The power source is automatically selected to the highest voltage source.

Mifare classic sticker. It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. Supported card types: mifare1 s50, mifare1 s70, Mifare Pro, mIFARE Ultralight, and MIFARE DESFire. Power voltage : 3. 3v, operating frequency: 13. 56mhz. Data transfer rate: Maximum 10Mbit/s.

ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable #ad - Read range: 0 ~ 35mm mifare1 card, Module Interface: SPI. The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal.

The module can be directly loaded into the various reader molds. The module use a voltage of 3.

More information about ELEGOO EL-CB-005 #ad


Similar products



Raspberry Pi 3 Model B Motherboard

#ad
#ad
RASPBERRY PI RASPBERRYPI3-MODB-1GB #ad - 13. 56mhz tag. Mifare classic 1K card. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, RX, so users have more breadboard space. Use the driver from above link.

It is a smallest, complete, and breadboard friendly board. Mifare classic 1k sticker. 10 different colors, stepper motor 3d printer etc, 120units copper cable in total, for making prototypes with arduino boards, The combinations provide a jumper for whatever you need.802. 11n wireless lan, 10/100Mbps Lan Speed.

Raspberry Pi 3 Model B Motherboard #ad - It's got a pin layout that works well with the Mini or the Basic Stamp TX, GND on one top, ATN, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. The power source is automatically selected to the highest voltage source.

1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Technical specifications: - broadcom bcm2837 64bit ARMv8 QUAD Core 64bit Processor powered Single Board Computer running at 1. 2ghz - 1gb ram - bcm43143 wifi on board - bluetooth low energy ble on board - 40pin extended gpio - 4 x usb2 ports - 4 pole stereo output and composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source now supports up to 2.

More information about RASPBERRY PI RASPBERRYPI3-MODB-1GB #ad


Similar products



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
#ad
Elegoo EL-CP-004 #ad - Bluetooth 4. 1, bluetooth Low Energy. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, RX, so users have more breadboard space. Mifare classic 1k label.

Mifare classic 1k sticker. Supported card types: mifare1 s50, mifare pro, mifare1 s70, mIFARE Ultralight, and MIFARE DESFire. Power voltage : 3. 3v, operating frequency: 13. 56mhz. Data transfer rate: Maximum 10Mbit/s. Read range: 0 ~ 35mm mifare1 card, Module Interface: SPI. The mf522-an module design the circuit of card read by using the original Philips MFRC522 chip.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds. The module use a voltage of 3. 3v, it can ensure stable and reliable work, it can connected communication with user's any CPU mainboard through several lines of SPI interface, and reader distance.

More information about Elegoo EL-CP-004 #ad


Similar products



Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino

#ad
#ad
Elegoo EL-CB-001 #ad - 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. Each cable length: about 20 cm /8-inch. Packing in a color box. We have always cared about the customer experience and improve the product function details.

Mifare classic 1k label. We'd like to receive your valuable suggestions for our products and make your idea come true. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. 10 different colors, stepper motor 3d printer etc, 120units copper cable in total, for making prototypes with arduino boards, The combinations provide a jumper for whatever you need.

Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino #ad - Mifare classic 1K card. 13. 56mhz tag. So we can control the quality of our productions by ourselves for you. Mifare classic 1k sticker. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Features * atmega328p microcontroller * input voltage - 7-12V * 5V Electric current: 500MA * 3.

More information about Elegoo EL-CB-001 #ad


Similar products



Elegoo EL-CB-003 MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino

#ad
#ad
Elegoo EL-CB-003 #ad - This version is optimized in the original version, mainly for customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use. Mifare classic 1k label. We have the manufacture factory, making productions and selling by ourselves.

Use 5. 5 * 2. 1mm dc barrel jack compatible with 5. 5 * 2. 5mm dc barrel jack. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. The nano is using the chips atmega328p and cH340, not FT232 as official Arduino, so pls. The power source is automatically selected to the highest voltage source.

Elegoo EL-CB-003 MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino #ad - 1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core. Each cable length: about 20 cm /8-inch. Faster transfer rates and more memory.

More information about Elegoo EL-CB-003 #ad


Similar products